Product Description:
North States Passage Metal Petgate Matte Bronze can be pressure mounted easily between rooms, doorways and other spaces. The color of this heavy-duty steel gate is a beautiful matte bronze; it’s sure to complement any home décor and will stand the test of time. This pet gate has an exclusive small door (9.5” x 8”) which swings freely allowing your pet the freedom to come and go as they please. Want to contain your pet – no problem. The small door also locks for containment with the Grip-n-Twist™ latch offering you peace of mind. Perfect for households with puppies or multiple pets. Key features of this pet gate include an extra-wide 21” door opening so that you and your pet can pass through with ease. A swing control lever on the bottom of the door allows the gate to swing in one or both directions. The large handle design easily fits into the palm of your hand for a comfortable grip. This pet gate pressure mounts by using tension knobs to secure the gate in place. It’s ideal for a variety of room openings or in doorways measuring 29.8 to 38 inches wide using the two extensions included and is 30 inches high.

Features:
• Easy to use – extend tension knobs until gate fits tightly
• Pet door (9.5″ x 8″) swings freely or Grip-n-Twist Latch locks for containment
• Swing gate in one or both directions with swing-stop feature
• Steel construction in a matte bronze finish will complement any home décor

Instructions:
Assembly Required?: Yes
Assembly Instructions:
Step 1: Measure the width of the opening and determine number of extensions needed for the gate. Adding Extensions: remove upper and lower end caps on the gate frame. NOTE: If it is difficult to remove, use a flat head screwdriver to pry the end caps on the gate frame out. Connect the extension bar to both upper and lower extension connectors. Insert extension into gate frame. Re-insert upper and lower caps into the extension connectors.
Step 2: Attach gate stopper to the lower bar on the door frame. NOTE: Insert gate stopper so the arrow is facing up and stopper knobs slide down.
Step 3: Insert the front latch (K) and the back latch (L) into the bottom of the pet door frame. Firmly connect them together to lock into place. NOTE: Insert latch so the release button is facing up.
Step 4: Place tension knobs onto spindles, insert spindles into gate.
Step 5: Align and secure with wall cups onto your wall with tape pads or screws. NOTE: Make sure the bottom of the gate frame remains completely flat on the floor.
Step 6: Tighten both top and bottom tension knobs inward towards the gate. To ensure safe installation, continue to tighten tension knobs until the gap between the gate latch and the gate frame housing is eliminated.

Safety:
Safety Warnings: Children have died or been seriously injured when gates are not properly secured. Always install and use gates as directed using all required parts.Stop using when a child can climb over or dislodge the gate.Install only with locking/latching mechanism securely engaged on side away from child.To prevent falls, never use at top of stairs without mounting hardware.Never use to keep child away from pool.This product will not necessarily prevent all accidents.Never leave child unattended.Periodically check all fasteners to be sure they are tight and secure, stop using gate if any parts are missing or become damaged.

Sizes and Specification:
Location: Between Rooms/Hallways, Various
Width: Adjusts to fit 29.8″ – 38″ wide
Mounting: Pressure Mount
Height: 30″
Material: Metal
Color: Matte Bronze